Appliance repair in Erie, CO covers a town where nearly half of all households have children under eighteen. That shapes the work: laundry runs harder here than almost anywhere else we cover, and a dryer that quits is not a minor inconvenience. Every job starts with a diagnostic and a written estimate, and nothing gets opened up until you approve the number.

What We Repair in Erie, CO

Our technicians are trained and equipped to handle all major home appliances, from everyday breakdowns to built-in and luxury units.

Refrigerator Repair

Cooling failures, ice maker faults and compressor work

Freezer Repair

Chest and upright units, frost buildup, temperature swings

Ice Maker Repair

Built-in and under-counter residential units

Wine Cooler Repair

Thermoelectric and compressor-based units

Washer Repair

Drainage, spin faults and error codes on all machine types

Dryer Repair

No heat, long cycles, drum and belt issues

Dishwasher Repair

Drainage, door latch, spray arm and error codes

Oven Repair

Temperature calibration, ignition faults, gas and electric

Wall Oven Repair

Single and double built-in wall ovens

Range and Stove Repair

Burner faults, control boards and gas range diagnostics

Cooktop Repair

Gas and electric cooktop diagnostics

Range Hood Repair

Motor, fan, filter and duct-connected hoods

Dryer Vent Cleaning

Full duct clearing where restricted airflow is the real fault

Garbage Disposal Repair

Jams, leaks and motor failures, all brands

Trash Compactor Repair

Drive motor, ram and switch replacements

Washer and Dryer Repair

Family laundry loads mean more cycles, heavier loads and faster wear on the same parts. Dryers arrive as one complaint above all others: the drum turns and the heat never comes. Nine times out of ten that is a thermal fuse, and the fuse blew because the vent path was restricted.

Replacing the fuse without clearing the duct just schedules the next failure, which our dryer not heating guide walks through. We check the vent on every no-heat diagnostic and handle dryer vent cleaning where the duct is the real fault. Washer work covers drainage failures, drum bearing noise on front-loaders, door seal wear, lid switch faults and the error codes LG and Samsung machines throw.

Refrigerator and Freezer Repair

Refrigerator work is our second-largest category, and the symptoms repeat. Food going warm while the fan still runs, or an ice maker that fills and never releases. A compressor that clicks and stops, or frost building on one shelf and clearing nowhere.

Sealed-system and refrigerant work is where credentials matter, and our technicians are EPA-608 certified for it: compressor diagnostics, refrigerant handling and the leak finding that separates a repairable unit from one that is finished. Garage refrigerators and chest freezers are common in the newer Erie subdivisions, where a second unit carries the overflow from a family kitchen.

Ovens, Ranges, Dishwashers and the Rest of the Kitchen

Cooking appliance calls run to temperature calibration, gas ignition faults, heating element replacement and control board diagnostics, on both wall ovens and freestanding ranges. The technician who runs the diagnostic is the one who finishes the repair.

Dishwashers bring drainage faults, door latch failures, spray arm damage and pump motor replacement. Bosch machines are common in the newer kitchens and announce their problems clearly, which our Bosch E15 repair guide covers. Wine coolers, built-in ice makers, garbage disposals and trash compactors round out what we service.

A Coal Town That Grew Twenty-Four Times Over

A call placed before noon usually gets a technician out that afternoon. We confirm a two-hour arrival window when you book. The window is what we commit to: how long the repair takes depends on what the diagnostic finds.

Erie, Colorado was platted in 1871 around the Briggs mine, the first commercial coal mine in Weld County. The mines closed through the middle of the last century, the last one in 1978, and for a long time the town stayed small. In 1990 it had about twelve hundred residents.

By 2020 it had thirty thousand. Almost everything outside Old Town was built after the mid-1990s. That means most Erie appliances went in at roughly the same time, and they are now reaching the age where control boards, pumps and compressors start to fail together.

Old Town is the exception and worth naming separately. The miners’ cottages from the early 1900s and the century-old brick buildings along Briggs Street have kitchens that were never designed around modern appliances, and electrical service that predates them by decades.

How an Erie Service Call Works

You book online and choose a two-hour arrival window. An insured technician comes to the address. There is no dispatch center in the middle and no subcontractor: the person who diagnoses the appliance is the person who repairs it.

Wilson & Myers is a family-owned company rather than a franchise desk routing your call to whoever is available, and the technician giving you the estimate is the one who has to stand behind it. The estimate names the part, the labor and what the repair will fix. You approve it or decline it, and work starts only after you say so.

We source parts through national supplier networks and manufacturer contracts. How quickly a repair closes depends on whether the supplier has the right component for that specific model. Either way we tell you the expected schedule before you commit. Every repair carries a 100-day labor warranty.

Erie straddles two counties, with most of the town in Weld and the western side in Boulder County. Both halves sit inside the Denver Metro Area we cover, on identical terms. Neighboring Lafayette, Louisville, Longmont and Broomfield sit in the same dispatch zone.

What Fails First in Erie, Neighborhood by Neighborhood

In Erie, the age of the house predicts the call better than the brand does. In Old Town, around Briggs Street and Coal Creek Park, a cottage may hold a new range beside a decades-old gas connection. We look at the valve, the flex line and the outlet before blaming the appliance. In the oldest cottages, an ungrounded outlet or a shared kitchen circuit can make a healthy refrigerator look faulty.

Much of Vista Ridge, Erie Commons and Candlelight Ridge went up in the 2000s. Many of those kitchens are on their second refrigerator and dishwasher, often a Samsung, LG or Whirlpool. That generation brings ice maker faults, control board failures and evaporator fans that start to buzz. Behind the machine, the shutoff valve is frequently still the original.

Flatiron Meadows, Colliers Hill and Erie Highlands are largely 2010s builds, and their original appliances are now reaching retirement age. Here we see the first wave of failed dishwasher pumps, washer drain pumps and refrigerator ice makers. Canyon Creek mixes both ages, since new sections opened there in 2025 beside homes from earlier decades.

Westerly, Morgan Hill and Parkdale are still young. Calls there are mostly early-life problems. A refrigerator door will not seal because the unit was never leveled, a water line is kinked, or a washer walks because its shipping bolts stayed in. These are quick fixes, and catching them early keeps a small fault from turning into a leak.

Townhome pockets such as Brennan by the Lake, mostly built in the late 2010s, and Grandview follow the same age pattern on a smaller footprint. With shared walls, a leaking washer or dishwasher can become the neighbor’s problem as well. A slow drip or a damp cabinet floor is worth a call before it spreads.

Homes in Candlelight Ridge are larger, around 3,500 to 4,500 square feet finished. Where a kitchen there or elsewhere in Erie has built-in refrigeration, double wall ovens or a panel-ready dishwasher, we service it. Sub-Zero, Thermador, Wolf and Miele get the same careful diagnostic as any other machine. Sealed-system and refrigerant work on any refrigerator is handled by EPA-608 certified technicians.

When to Call Wilson & Myers

Call while the appliance is failing rather than after it has stopped. Watch for cooling that drifts, a cycle taking twice as long as it used to, or a burner that lights on the third try. These are the cheapest repairs and the ones most likely to close on the first visit. For any refrigerator running warm, call sooner: a compressor working against a failing seal tends to take itself out.

Repair or Replace

A repair earns its place when it costs meaningfully less than a comparable replacement and the machine has real service life left. In a household running laundry daily, the calculation leans toward repair more often than people expect, because the replacement will face the same load. Our technicians give a straight read during the diagnostic rather than a script.

Refrigerators: sealed-system work is usually worth doing under fifteen years; control board and ice maker faults almost always pencil out under twelve.
Washers and dryers: motor, belt and pump repairs are straightforward under ten years, and a front-loader drum bearing is worth replacing if the machine has three or more years left in it.
Ovens and ranges: heating elements, igniters and control boards are economical well past fifteen years, and sealed gas burner systems rarely need wholesale replacement.
Dishwashers: pump motor and control board work makes sense under eight years, and the drain pump is one of the cheapest fixes on any brand.

Where a replacement is the better call, the technician says so. Book a diagnostic and we will confirm the next available window for your Erie address.