Getting a new washer delivered is only half the job. Wilson & Myers handles washer hookup and washer installation across Denver Metro Area: hot and cold supply connections, drain setup, leveling, and a full test cycle before we leave. New installations, replacements, and stackable configurations all covered. Same-day service available.
Same-day washer installation near me and washing machine installation near me across Denver Metro Area. Washer and dryer installation service calls answered seven days a week.
diagnostic $69
A standard washing machine hookup connects hot and cold supply hoses to the existing wall valves, routes the drain hose into the standpipe or utility sink, levels the machine on its leveling feet, and runs a test cycle to confirm there are no leaks and the machine spins balanced. We supply braided stainless hoses on every job: rubber hoses fail over time and are the leading cause of laundry room floods. If your existing wall valves are corroded or don’t shut off fully, we replace them as part of the hookup. Book online to confirm same-day availability.
Stackable washer dryer installation requires a stacking kit specific to the washer and dryer model pair. The dryer sits on top of the washer using a bracket that must be the correct part for the exact models involved. Stacking kits are not universal and attempting to stack without the correct kit is unsafe. We verify the correct kit before scheduling, handle the stacking and securing of both units, complete all connections, and test both appliances before leaving. For dryer hookup, see our dryer hookup page.
Moving a washer to a new room or a new home requires confirming that hot and cold supply valves and a proper standpipe or drain outlet exist at the destination. A standpipe must be at least 18 inches tall and no more than 96 inches from the floor for the drain hose to function correctly. We check the destination before disconnecting the washer, handle the move, and complete the new hookup with a leak and function test.
Every washer hookup job includes the same final checklist: both supply hoses fully tightened with no drips, drain hose seated in the standpipe at the correct depth, machine level front-to-back and side-to-side, spin cycle run to confirm no vibration walking, and supply valves turned to confirm they open and close fully. A washer that walks across the floor during spin is almost always a leveling problem, not a mechanical fault.
Wilson & Myers handles washer installation near me calls that Denver Metro Area homeowners depend on when a new machine arrives. Whether you need a straightforward washing machine hookup, a washer dryer installation on the same visit, a laundry hookup installation in a new space, or a washer and dryer installation service call that covers both units, we are equipped for the job.
A standard washer hookup includes hot and cold supply hose connection, drain hose routing, machine leveling, and a full test cycle. We supply braided stainless hoses and replace corroded wall valves if needed.
Not for a standard connection to existing valves and a standpipe. If no plumbing exists at the location where you want the washer, a plumber needs to rough in supply lines and a drain first. We identify this on the call and advise accordingly.
Yes. Stackable washer dryer installation for both units on the same visit is our standard approach. For the dryer hookup specifically, see our dryer hookup page.
We measure the space and the machine before starting. If the new model is deeper or wider than the existing space allows, we advise on options before any connections are made.
Yes. If the washer is already installed but not working correctly, see our washer repair page for same-day mechanical diagnosis across Denver Metro Area.
Wilson & Myers handles washer and dryer installation and washer dryer hookup for all major residential brands in Denver Metro Area.
Front-load and top-load models. Most common consideration: vibration dampening on high-spin front-loaders. Anti-vibration pads recommended on upper floors. Same-day hookup available.
Front-load and top-load models including TurboWash series. Most common consideration: standpipe height verification on high-drain-speed models. Same-day hookup available.
Top-load and front-load models. Straightforward connections, widely available parts. Most common consideration: lid lock testing on top-load models after connection.
Covers standard GE and GE Profile front-load and top-load models. Most common consideration: drain hose routing on front-load models with high-loop requirement.
Whirlpool-platform top-load and front-load models. Most common consideration: spin balance testing on high-capacity top-loaders. Same-day hookup available.
Front-load and top-load models. Standard connections with widely available supply hoses and fittings. Same-day hookup available across Denver Metro Area.
Front-load models with European-influenced design. Most common consideration: pedestal installation and correct stacking kit for Electrolux dryer pairing.
Premium residential top-load and front-load models. Most common consideration: commercial-grade vibration testing during spin cycle on first use.
Compact European front-load models common in Denver condos and apartments. Most common consideration: condensation drain setup on models without external venting.
European luxury front-load models. Most common consideration: 240V outlet verification and correct European-to-US drain adapter on first installation.
Top-load and front-load models with unique wash motion systems. Most common consideration: leveling verification on top-load models with AquaSmart technology.
Scandinavian luxury front-load models. Most common consideration: drain pump height verification and correct standpipe depth on compact installations.
Amazing service 10/10 would recommend!!!!! The team were very professional and removed and hauled away my dishwasher with ease.
Fast prompt service, fixed out dryer very quickly. Friendly and reasonable prices. Would work him again anytime.
Ryan was great with my dryer repair. He complete the task in less than 1 hr and was great with responding quickly! Thank you.
They responded very quickly to my call and arrived timely (appreciated the text that they were on the way & when they arrived). They were very nice and explained everything that they found wrong with my dryer and walked me through the process of how they would repair the issues prior to repairing it. Would recommend!
Technician arrived on time and was courteous and professional in their explanation. I felt comfortable with their recommendations. Appreciate the level of service from this small company
Had our washing machine break mid-cycle on a Sunday. Within a few minutes of reaching out to them, the team at Wilson and Myers had contacted me with available times including that very evening, no additional fees for a weekend. The tech that arrived was really friendly and professional and got the job done quickly and below the amount I had prepared myself to pay. Will definitely use again if needed!
Wilson & Myers is a verified member of the Denver Metro Chamber of Commerce.