100 day warranty
Installed, Tested and Covered
Every installation we complete in Arvada is covered for 100 days on parts and labor, and gas and water connections are leak-checked before we leave.
Book onlineAppliance Installation in Arvada, CO
Delivery crews set the box in place and leave the connecting, leveling and venting for someone else. We finish that part across Arvada; the full list is on our appliance installation page.
What Installation Runs Into Here
In the older southern band between Sheridan and Kipling, kitchens were framed for the appliances of 1960. A current refrigerator is deeper than the alcove it replaces, dishwasher bays run shallow, and a range may sit on a gas stub positioned for an older unit. Those are the measurements worth taking before the delivery is booked.
West of Indiana Street the houses went up between 1985 and 2013, so the openings are standard and the connections sit where you expect them. What we replace there is the original shutoff valve and supply line behind the old machine, which have usually not been touched since the house was built.
How an Installation Call Works
Tell us the appliance and the address when you book, and we will confirm a two-hour arrival window. The technician checks the connection, levels and secures the unit, tests it under load and takes the packaging away. Where a dryer vent is restricted, we handle dryer vent cleaning in the same visit.
If the old appliance turns out to be repairable rather than finished, we say so, and appliance repair in Arvada runs through the same technicians.
From Olde Town Kitchens to Trailstone Villas: Installing in Arvada
Installation in Arvada changes with the decade a house was built, and the neighborhood name usually tells us which decade. It is worth knowing which pattern your house follows before the delivery is booked.
In Olde Town and Stocke-Walter, the older houses were never framed for a modern refrigerator or a full-size laundry pair. Doorways and stairs are the first measurement, then the cabinet opening. A range often sits on a gas stub placed for a much older unit. If the new range needs that stub moved, the work belongs to a licensed gas fitter, and we say so before delivery day.
The 1960s and 1970s split-levels and bi-levels of Allendale, Scenic Heights, Lake Arbor and Clubcrest bring a different problem. Half-flights of stairs sit between the door and the laundry, and the turn at each landing decides what fits. Older laundry rooms here may still have a three-prong dryer outlet, so we match the cord to the outlet that is there.
Meadowglen is a useful exception. It was built by one builder from the mid-1970s into the early 1980s, so kitchen and laundry layouts repeat from house to house. One measured install there tells us a lot about the next one down the street, including where the gas and water connections sit.
Townhome pockets need their own plan. Think of the three-story SaBell townhouses in Allendale, the 1980s condos in Clubcrest and the townhomes in the Village of Five Parks and Whisper Creek. Those homes often mean a laundry closet, a stacked pair or a flight of stairs between the truck and the room. There the delivery path matters as much as the closet itself.
In the subdivisions built from the late 1980s through the 2000s, such as Landing at Standley Lake, Ralston Valley and West Woods Ranch, openings are standard. The catch is height. The cabinet above the refrigerator sets the limit, and a taller French-door model can miss by an inch. We measure under that cabinet, not just the width of the gap.
The newest streets have their own quirks. Leyden Rock has many walkout basements, which gives a level path in for a basement fridge or laundry. Geos has no natural gas service, so a gas range or gas dryer will not connect there, and every replacement has to be electric. In Candelas and Trailstone, owners often upgrade a builder-grade unit into the same opening, and the opening, not the catalog, sets the limit.
If a larger Spring Mesa home or a Whisper Creek estate house has a built-in or panel-ready unit, the cutout leaves no margin. We measure the opening and the panel before you order, because a built-in that misses by a fraction cannot be pushed in.
When to Call Wilson & Myers
Call before the appliance arrives rather than after. Measure the doorway the box has to come through, not just the opening it is going into, and measure cabinet depth as well as width.
Book an installation and we will confirm the next available window for your Arvada address.
Appliance Installation in Arvada: Common Questions
Do you handle gas connections?
We connect gas appliances and leak-check the connection before leaving. Where a job needs a new gas line run or work that belongs to a licensed gas fitter, we tell you at the diagnostic rather than partway through.
Do you take the old appliance away?
We take the packaging, and we can disconnect and move the old unit out. Tell us when you book so the technician arrives expecting it, because removal changes how long the visit takes.
Which parts of Arvada do you install in?
All of 80002, 80003, 80004, 80005 and 80007, across Olde Town, the older streets between Sheridan and Kipling, and the newer subdivisions west of Indiana Street. Neighboring Wheat Ridge, Westminster, Golden, Broomfield and Denver are in the same dispatch zone, inside the Denver Metro Area we cover.
New Appliance to Install in Arvada?
Tell us what the machine is doing and we will confirm an arrival window that suits you.
