We repair appliances. We do not sell them, and we are not a showroom with a service desk attached. Appliance repair in Boulder, CO is what our technicians do all day, and every job starts with a diagnostic and a written estimate. Nothing gets opened up until you approve the number.

What We Repair in Boulder, CO

Our technicians are trained and equipped to handle all major home appliances, from everyday breakdowns to built-in and luxury units.

Refrigerator Repair

Cooling failures, ice maker faults and compressor work

Freezer Repair

Chest and upright units, frost buildup, temperature swings

Ice Maker Repair

Built-in and under-counter residential units

Wine Cooler Repair

Thermoelectric and compressor-based units

Washer Repair

Drainage, spin faults and error codes on all machine types

Dryer Repair

No heat, long cycles, drum and belt issues

Dishwasher Repair

Drainage, door latch, spray arm and error codes

Oven Repair

Temperature calibration, ignition faults, gas and electric

Wall Oven Repair

Single and double built-in wall ovens

Range and Stove Repair

Burner faults, control boards and gas range diagnostics

Cooktop Repair

Gas and electric cooktop diagnostics

Range Hood Repair

Motor, fan, filter and duct-connected hoods

Dryer Vent Cleaning

Full duct clearing where restricted airflow is the real fault

Garbage Disposal Repair

Jams, leaks and motor failures, all brands

Trash Compactor Repair

Drive motor, ram and switch replacements

Refrigerator and Freezer Repair

Refrigerator work is our most frequent call, and the symptoms repeat. Food going warm while the fan still runs, or an ice maker that fills and never releases. A compressor that clicks and stops, or frost building on one shelf and nowhere else.

Sealed-system and refrigerant work is where credentials matter, and our technicians are EPA-608 certified for it. That covers compressor diagnostics, refrigerant handling and the leak finding that separates a repairable unit from one that is finished. In the older houses a modern refrigerator often sits in a space framed for a much smaller one, and clearance at the back matters more than people expect.

Washer and Dryer Repair

Dryers arrive as one complaint above all others: the drum turns and the heat never comes. Nine times out of ten it is a thermal fuse, and the fuse blew because the vent path was restricted. Replacing the fuse without clearing the duct just schedules the next failure, which our dryer not heating guide walks through.

We check the vent on every no-heat diagnostic and handle dryer vent cleaning where the duct is the real fault. Washer work covers drainage failures, drum bearing noise on front-loaders, door seal wear, lid switch faults and the error codes LG and Samsung machines throw. In the Victorian and Craftsman houses on Mapleton Hill and in Whittier, the laundry frequently sits in a basement with a long, awkward vent run added decades after the house was built.

Ovens, Ranges, Dishwashers and the Rest of the Kitchen

Cooking appliance calls run to temperature calibration, gas ignition faults, heating element replacement and control board diagnostics, on both wall ovens and freestanding ranges. If you are looking for someone to fix an oven near you in Boulder, the technician who runs the diagnostic is the one who finishes the repair.

Dishwashers bring drainage faults, door latch failures, spray arm damage and pump motor replacement. Bosch and Miele machines are common in renovated kitchens and announce their problems clearly, which our Bosch E15 repair guide covers. Wine coolers, built-in ice makers, garbage disposals and trash compactors round out what we service.

New Appliances in Old Houses

A call placed before noon usually gets a technician out that afternoon. We confirm a two-hour arrival window when you book. The window is what we commit to: how long the repair takes depends on what the diagnostic finds.

Boulder has limited its own growth deliberately for more than sixty years, through the Blue Line in 1959, the open space tax in 1967, the height limit in 1972 and the Danish Plan in 1976. The result is a city with very little new housing inside it and a great deal of housing from between 1900 and 1970.

That produces a pattern we see here more than anywhere else we work: current appliances installed into houses that were never designed around them. Mapleton Hill, Whittier and University Hill hold Victorian and Craftsman houses where the kitchen has been renovated two or three times while the walls stayed put. Martin Acres is largely 1950s, Table Mesa dates mostly from the 1960s, and Newlands mixes early 1900s and mid-century homes. The eastern edge and the city’s part of Gunbarrel are newer.

The practical effect is that the appliance is usually the youngest thing in the room. Electrical service, cabinet depth, doorway width and vent routing all predate it, and all of them affect the repair.

How a Boulder Service Call Works

You book online and choose a two-hour arrival window. An insured technician comes to the address. There is no dispatch center in the middle and no subcontractor: the person who diagnoses the appliance is the person who repairs it.

Wilson & Myers is a family-owned repair company. We are not a retailer, so nobody has a reason to tell you the machine is finished when it is not. The estimate names the part, the labor and what the repair will fix. You approve it or decline it, and work starts only after you say so.

We source parts through national supplier networks and manufacturer contracts. How quickly a repair closes depends on whether the supplier has the right component for that specific model. Either way we tell you the expected schedule before you commit. Every repair carries a 100-day labor warranty.

We also work with landlords and property managers across the rental stock near the university, where a failed appliance is a tenant problem before it is a maintenance one. Boulder sits at the northwest edge of the Denver Metro Area we cover, and neighboring Louisville, Lafayette, Superior and Longmont are in the same dispatch zone.

How Boulder Neighborhoods Shape the Repair

In Boulder the age of the house often predicts the repair. A failure in a 1920s bungalow rarely looks like one in a 1990s two-story.

In Goss Grove, Whittier and the University Place bungalows, the house is usually many decades older than the machine inside it. The trouble often sits behind the appliance: a worn shutoff valve, a tired gas connector, a circuit never sized for today’s load. A range that lights slowly or a dryer that trips a breaker can be a supply problem first. We check the connection before we condemn the part.

Martin Acres and Majestic Heights are compact ranch neighborhoods from the 1950s and 1960s, and Table Mesa adds 1960s ranches and bi-levels. Frasier Meadows and Keewaydin, in the southeast, come from the same broad era. These kitchens have been through several rounds of appliances, so the repairs follow current machines rather than the house. Ice makers, drain pumps, control boards and door gaskets lead the list.

Devils Thumb and Shanahan Ridge brought tri-levels and two-story homes in the 1970s and early 1980s. A tri-level layout can put the laundry a half level down with a longer vent path. A long, restricted vent run is where most no-heat dryer calls begin.

Dakota Ridge, built from the mid-1990s into the 2000s, is one of the younger pockets in the city. Houses there are on their first or second round of replacements, often Samsung, LG or Whirlpool. That means control boards, ice makers in French-door refrigerators and front-load washer error codes.

Newlands breaks the age rule. Many of its houses have been rebuilt, and rebuilt kitchens are where built-in and panel-ready units from Sub-Zero, Thermador, Wolf and Miele tend to turn up. Those machines need model-specific parts, which we source through national supplier networks and manufacturer contracts.

On University Hill, rentals change the pattern again. Machines there run more cycles with fewer owners watching, so small faults run longer before anyone calls. If the fault turns out to be the space rather than the machine, our Boulder installation page covers what an older opening needs.

When to Call Wilson & Myers

Call while the appliance is failing rather than after it has stopped. Watch for cooling that drifts, a cycle taking twice as long as it used to, or a burner that lights on the third try. These are the cheapest repairs and the ones most likely to close on the first visit. For any refrigerator running warm, call sooner: a compressor working against a failing seal tends to take itself out.

Repair or Replace

A repair earns its place when it costs meaningfully less than a comparable replacement and the machine has real service life left. In a Boulder kitchen there is a second question worth asking first: whether a current model will physically fit the space the old one came out of. Our technicians give a straight read on both during the diagnostic.

Refrigerators: sealed-system work is usually worth doing under fifteen years; control board and ice maker faults almost always pencil out under twelve.
Washers and dryers: motor, belt and pump repairs are straightforward under ten years, and a front-loader drum bearing is worth replacing if the machine has three or more years left in it.
Ovens and ranges: heating elements, igniters and control boards are economical well past fifteen years, and sealed gas burner systems rarely need wholesale replacement.
Dishwashers: pump motor and control board work makes sense under eight years, and the drain pump is one of the cheapest fixes on any brand.

Where a replacement is the better call, the technician says so, and we have no stake in which answer it is. Book a diagnostic and we will confirm the next available window for your Boulder address.