
Samsung Washer Won’t Spin: Front-Load and Top-Load Fixes
A Samsung washer not spinning leaves clothes wet in the drum and the dryer waiting. Samsung's four platforms handle this differently: WF front-load, WA top-loa…
Call us & text us 24/7
Amana range hood repair starts with one fact: none of the hoods Amana.com lists beside its ranges carries the Amana name. So this page covers those hoods, and the hood over your Amana range whatever its label. An over-the-range microwave vents a range too. It is still a microwave, and we do not take those.
Some of what looks like a fault is written into the hood’s own manual. Take the WVW57UC0F and WVW57UC6F wall canopies. Their blower stops only on a second press of the off and minimum button.
Find your hood below by its model number. That number decides the bulb, the filter and how high the hood hangs, so it matters more than any label. Each hood record on Amana.com names another brand or none at all. Not one reads Amana, so we name these hoods by model number.
Away from its Hoods page, Amana.com also lists under-cabinet hoods such as the UXT4030AD, UXT4130AD and UXT4236AD. None of those carries the Amana name either.
Our Amana cooking appliances page sets the hood beside the range below it and the oven inside that range.
Read the label first, because the model number decides which manual, filter and warranty paper apply. The label also carries the electrical rating and the clearances its installation must meet.
On Amana.com, the manuals page places the hood label on the left-hand side of the rear wall, underneath the hood. The model-number page says underneath the unit once it is installed. The hood manuals narrow that down by type. Look first at these spots.
Inside the hood, on its left wall.
Its manual names two spots: the left wall inside the hood, and the rear wall behind the filter.
Behind the left grease filter, on the rear wall of the hood.
On the front of the vent body, above the terminal box cover.
Start from the two Amana.com spots above.
Before you book, run the checks the hood manuals leave to the owner.
Amana’s gas range documents warn against any ventilation that blows air down toward the range. The AGG222VD, AGR4203MN, AGR6303MM and AGR5330BA documents name the risk: ignition and combustion problems, injury or unintended operation. Our Amana range page covers the burners themselves.
Three of Amana’s range installation documents, for the AEP222VA, AGG222VD and AGR4203MN, set the cabinet clearance above the cooking surface. Allow at least 30 inches to the bottom of an unprotected wood or metal cabinet. Allow 24 inches where that bottom is covered with at least 1/4-inch flame-retardant millboard under the sheet metal those documents specify. The hood’s own instructions govern how high it hangs.
Those documents, and the ones for the AGR6303MM and AGR5330BA, say storage directly above the burners is best avoided. Where there is storage, a hood projecting at least 5 inches past the cabinet bottoms reduces the risk of burns or fire. That risk comes from reaching over the burners.
The hood manuals then differ by type. The WVW57UC0F, WVW57UC6F and UXW7324B canopies hang at least 27 inches over a gas cooking surface, and 24 over electric. The UXT3030AD and UXT2030AD ask 24 inches over either, and suggest 30 at most.
Amana’s manual for the 20-inch AEP222VA adds two habits for a range with a hood. Clean the hood and its filter often, so grease does not build up. Turn the fan on when flambéing food under it.
None of these hoods has a display, and no manual we read for them prints an error code. A hood shows trouble only by what it does. Several of those behaviors are documented, model by model, in the table below. Past them, a hood that still will not run, light or rise has a fault worth a visit.
| What you notice | Hood | What its manual says |
|---|---|---|
| Fan stays on high | UXW7324B, the 24-inch canopy | The blower runs at the highest speed button pushed in, so release the higher buttons first |
| Fan will not switch off | WVW57UC0F and WVW57UC6F | The off and minimum button stops the blower on a second press |
| Light flickers when switched | WVU17UC0J | The lamp may flicker each time the light switch moves |
| Downdraft blower silent | UXD8630DY and UXD8636DY | It runs only with each filter fully home, the button held 3 seconds, the vent fully up and the slider not at Off |
| Switches on the hood do nothing | UXT3030AD, UXT2030AD or WVU17UC0J on a wall switch | The wall switch turns motor and light on and off |
| Burner keeps sparking | UXD8630DY or UXD8636DY behind a gas cooktop | The vent can pull the flame off a flame-sensing igniter, so lower the blower or raise the flame |
Book us once the checks above are done and the hood still will not run, light, change speed or rise. What is left sits inside the hood. That means the motor, the speed and light switches and the wiring. On a downdraft it includes the parts that raise and lower the vent.
I usually ask for the model number from the hood’s label first. I also ask whether it vents outside or recirculates. Those two details decide the lamp, the filter and which paper governs.
Our insured technicians repair the hood over your range in your own kitchen, across the Denver Metro Area. We source parts through national supplier networks and manufacturer contracts. Every paid repair carries our 100-day labor warranty. It covers the work on your invoice.
Replacing a hood on the existing ductwork is a separate job, on our range hood installation page. For a repair, book online with the model number ready.
CPSC’s records hold no range hood recall under the Amana name, and its hood recalls name none of the hoods Amana.com lists. We read the label before any repair anyway.
The warranty documents Amana.com serves for these hoods give one year of parts and repair labor. They exclude bulbs, filters and corrections to the installation. For any hood, the paper that came in the box is the one that governs.
The covered repair goes through the contact printed on the hood’s own warranty. We are not that service, and we will point you there.
Removing a hood boxed in by cabinetry or trim, and any hood whose serial number is removed or altered.
The documents Amana.com serves for it do not agree, so we state no term. Read the paper that came with the hood.
The repair is yours to buy and ours to do, with our 100-day labor warranty on the work.
Which range hoods does Amana.com list?
Wall canopies, under-cabinet hoods and retractable downdrafts, such as the WVW57UC0F, the UXT3030AD and the UXD8630DY. Amana.com files each one under another brand or none, never under Amana.
We repair any of them, and whatever hood hangs over your Amana range.
Where is the model number on the hood over my range?
The spot depends on the model. On the under-cabinet UXT3030AD and UXT2030AD, look inside the hood on its left wall. The manual for the under-cabinet WVU17UC0J names two spots: the left wall inside the hood, and the rear wall behind the filter. On the WVW57UC0F, WVW57UC6F and UXW7324B wall canopies, look behind the left grease filter on the rear wall.
On the UXD8630DY and UXD8636DY downdrafts, the label sits on the front of the vent above the terminal box cover. For the glass WVW75UC6D, start from Amana.com’s two spots. One is the left-hand side of the rear wall, underneath the hood. The other is underneath the unit.
Copy every letter, because the number decides the bulb, the filter and the warranty paper.
How often should I clean the filters in my range hood?
No hood manual we read sets a schedule for the metal grease filter. Wash it when it needs it. Amana’s AEP222VA manual says to clean the hood and its filter often.
A charcoal filter is different. It cannot be washed, and the canopy manuals give it up to 6 months of normal use.
How high should a hood hang above an Amana gas range?
The hood’s own instructions decide it. The WVW57UC0F, WVW57UC6F and UXW7324B canopies ask at least 27 inches over gas, and the UXT3030AD and UXT2030AD ask 24.
The AEP222VA, AGG222VD and AGR4203MN installation documents add the cabinets. They ask at least 30 inches to an unprotected cabinet bottom, or 24 to one protected as they specify. Our Amana range page covers the range itself.
Do you repair over-the-range microwaves that vent the range?
No. An over-the-range microwave vents the range, but it is a microwave, and we do not take those. That includes Amana’s own over-the-range models.
Do you repair the hood whatever label it carries?
Yes. Our insured technicians repair the hood over your Amana range in your kitchen, whatever its label, across the Denver Metro Area. Our Amana page covers your other Amana machines.
Have the model number from the hood's label ready and know whether it vents outside or recirculates.
Repair guides, maintenance tips and troubleshooting walkthroughs written by our insured technicians.

A Samsung washer not spinning leaves clothes wet in the drum and the dryer waiting. Samsung's four platforms handle this differently: WF front-load, WA top-loa…

You opened the KitchenAid freezer this morning and the bin was empty. In my experience, the arm is the first thing worth checking: the fix costs nothing and ta…

A Frigidaire oven not heating can come down to a setting rather than a part. Before you book a repair, two checks cost nothing and take under a minute: the clo…

A Whirlpool dryer that tumbles but never heats traces to one of five faults, and three of them cost nothing to check. Here is the order to work through them, p…

F8 E4 means water reached the drip tray, not a fill fault. Here is the two-step reset and why it can fire on a brand-new install with a dry tray…

A Bosch dishwasher E22 error means one thing: the filter is blocked, and there is probably water sitting in the bottom of the tub…

A Frigidaire refrigerator not cooling is not always a broken refrigerator. The display on the door settles that question in about ten seconds…

You walked into the laundry room and the display is flashing D80. The drum is still turning. You do not know whether to stop the cycle or let it finish. D80 is…

A GE refrigerator not cooling usually falls into one of two failure paths. The question is simple: is the freezer still cold? If yes, the sealed system is inta…

You pull open the freezer on a July evening and find an empty bin. A Frigidaire ice maker not working in peak summer is one of the most frequent calls our Denv…

The LG washer UE code means the machine detected an unbalanced load during the spin cycle and stopped to protect the drum and bearings. UE is protection not br…

E24 on a Bosch dishwasher means the drain cycle did not complete. A clogged filter basket is the cause in most cases. If the filter is clear, the drain pump or…
Wilson & Myers dispatches insured technicians to homes running Amana appliances throughout the Denver Metro Area.
The visit starts with the model number from the hood's label and whether it vents outside or back into the kitchen. Every paid repair by our insured technicians carries a 100-day labor warranty on the work invoiced.
Wilson & Myers is a verified member of the Denver Metro Chamber of Commerce.
The use of any materials from this resource is possible only after the written consent of the copyright owner.